Masonry repair
Sweep & inspection
Caps & crownsLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Mount Vernon
Chimney repair in Mount Vernon typically runs $450 – $2,400 depending on what’s actually wrong, and the honest first step is a camera inspection, not a guess from the ground. We work throughout Mount Vernon’s densest neighborhoods weekly, from the pre-war colonials off East Lincoln Avenue to the brick walk-ups near Mount Vernon West station. Our crews know how older Westchester masonry behaves, and we show you photos of the damage before anyone quotes a repair. Call (914) 233-3156 to book a visit, and you’ll get a live arrival window, not a four-hour guess.
Why Hadley Chimney Yonkers Is Mount Vernon’s Preferred Chimney Repair Company
Mount Vernon homeowners tend to know their houses; they just don’t always know their chimneys. That’s where we come in. Hadley Chimney Sweep was founded in 2003, and our Chimney Repair team has worked on hundreds of older stacks in this city’s tightly packed neighborhoods. We carry the equipment to camera-scan a flue and show you exactly what’s going on, from first-degree creosote flaking to a cracked tile liner at the smoke chamber. Every tech is background-checked, uniformed, and arrives in a tracked window with live updates, the way a rideshare driver would. If you’re in Mount Vernon, you’re not getting a subcontractor from two counties away; you’re getting a crew that recognizes the telltale spalling on 1920s brick and knows what a freeze-thaw winter does to it.
Calls are answered by a live person, around the clock. That matters when you smell smoke backing into a bedroom at 9 p.m. and need someone who can talk you through whether it’s urgent or can wait until morning. We don’t route you through a voicemail tree, and we don’t send an answering service that promises a callback. You get a real human who can book the visit, explain what the tech will check, and tell you what the visit costs before anyone knocks on your door.
Styles & brands we work with
Chimney Liner Installation in Mount Vernon
Chimney Liner Installation in Mount Vernon is the repair we recommend more than any other in this city, and it’s the one where homeowners are most often misled. Older Mount Vernon houses, particularly the pre-1940 stock that dominates neighborhoods like Fleetwood and Oakwood Heights, were built with clay tile liners that crack under decades of thermal stress. When a clay liner fails, creosote (the flammable tar byproduct of burning wood) can seep into the masonry itself, and that’s a fire waiting for a spark. We don’t recommend a liner based on age alone; we camera-scan the flue and show you the fracture on a tablet before we quote a dollar figure.
When a liner is actually necessary
You need a liner when the existing flue is cracked, missing tiles, or was never there in the first place. Many Mount Vernon chimneys were built unlined, which was standard practice for open fireplaces a century ago but isn’t safe for modern appliances or heavy fireplace use. The fix is pulling a stainless steel liner, typically DuraFlex, through the existing flue and insulating it. We quote that work in writing before any material is ordered.
What liner installation costs here
A full chimney liner installation in Mount Vernon typically runs $1,800 – $3,400, depending on flue height, access from the roof or the firebox, and whether the old clay tiles need to be broken out first. A partial liner for a shorter run or a furnace flue usually lands between $1,100 and $2,100. That’s a real range, not a starting point. Your written estimate includes the liner system, insulation, crown repair if needed, and a new cap if the old one is rusted through.
Chimney Flashing Repair in Mount Vernon
Chimney Flashing Repair in Mount Vernon is the most common source of roof leaks in this city’s tightly spaced wood-frame houses. Flashing is the metal barrier where the chimney meets the roofline, and in Mount Vernon’s older colonials and bungalows, that metal has often been there since the Reagan administration. When it rusts, lifts, or was installed wrong in the first place, rainwater follows the chimney down into the attic and along ceiling joists. The fix is replacing the flashing with new step and counter flashing, properly integrated into the roof shingles and sealed with a high-quality chimney sealant.
How we diagnose flashing problems
We don’t guess from the ground. If you have water staining around the fireplace or a damp smell in an upstairs room after rain, we get on the roof and inspect the flashing joints. Many Mount Vernon roofs are steep and tight, and the chimneys sit close to neighboring walls, so access is a real part of the job. We photograph what we find and show you before any work is proposed.
Flashing repair cost in Mount Vernon
Chimney flashing repair in Mount Vernon typically runs $450 – $1,200 for a full replacement, depending on how many sides of the chimney are exposed and whether the surrounding shingles need to be lifted and re-nailed. A minor reseal, where the flashing is still sound but the sealant has failed, can be done for $250 – $450. We write the price down before work starts. It doesn’t change at the door.
Trusted Brands We Service in Mount Vernon
We work with materials we’d put in our own houses, not whatever’s cheapest on the truck. For Mount Vernon’s older chimneys, that means HeatShield ceramic repair compound to resurface deteriorated flues without a full rebuild, Gelco sealants for waterproofing masonry that’s been through too many freeze-thaw winters, and Olympia Chimney components where caps and dampers need replacing. We keep common sizes and fittings stocked for faster turnaround on Mount Vernon jobs, and we don’t use off-brand parts just to shave a few dollars. When a liner goes in, it’s DuraFlex. When a cap goes on, it’s built to actual dimensions, not a universal fit.
Common Chimney Repair Problems We See in Mount Vernon Homes
- Freeze-thaw spalling on pre-war brick. Mount Vernon winters drop below freezing often enough that water trapped in old brick expands and pops the face off the masonry. Once spalling starts, it accelerates. Waterproofing with a breathable sealant like Gelco stops the cycle, but only if applied before the brick loses structural depth.
- Clay tile liners that outlived their usefulness. Houses built before 1940 in neighborhoods like Fleetwood and South Side often have original clay tile flues with hairline cracks at the mortar joints. Those cracks let hot gases reach the surrounding masonry. The upgrade is a stainless liner, and we camera-scan before recommending it.
- Appliances venting into fireplaces that were never meant for them. A boiler or water heater vented into a chimney built for an open fireplace can backdraft, especially when the house is tightly sealed. That’s a carbon monoxide risk, plain and simple. If you have a gas appliance sharing a flue with a fireplace, that’s worth a camera look.
- Rusted flashing on tight roof penetrations. When chimneys sit close to a neighbor’s wall or a shared roofline, flashing takes more water concentration. By the time you see a ceiling stain, the metal has usually been failing for a season or two. We replace it properly with step flashing and counter flashing, then photograph the finished job.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Mount Vernon, NY
Here’s the straight answer: a chimney inspection with camera scan in Mount Vernon runs $150 – $250, and we apply that toward any repair you approve. Chimney flashing repair lands between $450 and $1,200. Chimney liner installation ranges from $1,100 to $3,400 depending on flue length and whether old tiles need removal. Chimney waterproofing typically runs $350 – $800, and mortar repointing runs $40 – $75 per square foot of masonry surface. These are real numbers from actual Mount Vernon jobs, not national averages that don’t reflect what a tight Fleetwood colonial or a South Side bungalow actually costs. Call (914) 233-3156 for a free written estimate. We show up, we look, we show you photos, and we give you a price before any work begins.
We Also Serve Cities Near Mount Vernon
Our crews cover Mount Vernon and the surrounding Westchester communities, including Pelham, New Rochelle, Yonkers, and Tuckahoe. If you’re in one of those areas and dealing with a cracked liner or persistent roof leak around the chimney, the same camera-first process applies. Call (914) 233-3156 and we’ll get you on the schedule.
Serving Mount Vernon, NY - Our Local Coverage Area
We’re based in the Mount Vernon area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Mount Vernon
A camera inspection is the only way to see what’s actually happening inside the flue, and in Mount Vernon’s older homes, what’s happening is often invisible from the roof or the firebox. Cracked clay tiles, hidden creosote glazing, or separation at the smoke chamber can’t be diagnosed by looking up with a flashlight. We run a camera down the full stack and show you the footage on a tablet. No repair is recommended until you’ve seen the evidence yourself, and the $150 – $250 inspection fee is credited toward any approved work. Call (914) 233-3156 to schedule one.
First-degree creosote is a dusty, flaky soot that brushes off fairly easily. Second-degree creosote is a crusty, tar-like glaze that needs mechanical scraping and chemical treatment. Third-degree creosote is a hard, shiny, baked-on glaze that’s highly concentrated fuel and the most common culprit in chimney fires. Mount Vernon’s long heating season, running from November through March, lets creosote accumulate in stages, and older chimneys with narrow or uneven flues trap more of it. If you’ve been burning green wood or running small, smoldering fires, you’re more likely to hit second or third degree faster. A sweep and a camera scan will show you exactly which stage you’re dealing with.
Every time rain or snow soaks into the mortar joints and the temperature drops below freezing, the water expands and breaks down the mortar from within. Over one Mount Vernon winter, that can mean dozens of freeze-thaw cycles, and over decades it turns solid joints into loose sand. That’s why spalling, where the brick face itself starts to pop loose, is so common on this city’s pre-war masonry. The repair starts with repointing the damaged joints, then waterproofing the brick with a breathable sealant so water can’t re-enter. It’s straightforward work, but it has to be done before the structural damage gets deep enough to require rebuilding.
Yes. Shared flues in a Mount Vernon walk-up serve multiple units, which means liner work or flue repair has to be coordinated with building access and sometimes with other residents’ fireplaces. These systems were often built with unlined masonry, and when one unit’s appliance vents into a flue shared with another unit’s fireplace, the airflow and drafting get complicated. We’ve done this work in buildings throughout the city, and the process is the same: camera-scan the shared flue, show the owner or super the condition on the tablet, and write up a plan that accounts for everyone who uses that stack. Calls are answered by a live person 24/7, so building supers can reach us the first time.
A missing or rusted chimney cap lets rain, snow, and debris fall directly into the flue, and in a wood-frame house, that water can travel from the chimney into the surrounding framing faster than you’d think. Mount Vernon has many neighborhoods where houses sit close together, and a chimney fire or a prolonged water leak in one home presents a real risk to the ones next to it. A properly sized cap with a spark arrestor keeps out water, animals, and embers. It’s a $150 – $400 fix that prevents damage that could cost thousands to repair, and every liner installation we do in Mount Vernon includes a new cap sized to the new flue. Call (914) 233-3156 to get one looked at.
Your Chimney, Caught on Camera Before Anyone Quotes a Price
On a pre-1940 colonial off East Lincoln Avenue, our tech found the original clay tile flue cracked at the smoke chamber and a third-degree creosote glaze in the bends. We camera-scanned the full stack, showed the homeowner the fracture on a tablet, then pulled a DuraFlex stainless liner and rebuilt the crown with a proper cap. That’s the process every time in Mount Vernon. You don’t take our word for it, and you shouldn’t. You see the damage with your own eyes, you get a written price, and any repair we make is covered by the 365-Day Done Right Promise, a written guarantee with a free second visit if the repair fails. That’s the whole model, and it’s been the model since 2003.
Contact Hadley Chimney Yonkers for Chimney Repair in Mount Vernon
If your Mount Vernon chimney has been limping along with a cracked liner, failing flashing, or masonry that’s starting to shed brick, don’t wait for the first snowfall to find out how bad it is. Call (914) 233-3156 for a free estimate. You’ll speak to a live person, book a visit with a background-checked tech in a tracked window, and pay from a digital invoice when the job is done, with before-and-after photos of every repair we make. We’re part of the Relay Home Co. family, and we work to The Relay Standard on every Mount Vernon job.
Written by Cory Mitchell, Owner at Hadley Chimney Yonkers, serving Mount Vernon since 2003.